Neue Festplatte einbinden...

Hi Leute,

habe eine alte SparcStation5 vom Verschrotten gerettet. Es werkelt darauf Solaris8 wacker vor sich hin. Nun habe ich eine neue Festplatte besorgt, habe aber Probleme diese anzubinden. Es ist Seagate ST39175LC ( http://www.seagate.com/support/disc/specs/scsi/st39175lc.html ) und format zeigt mir folgendes:

Code:

0. c0t1d0 <drive type unknown>
/iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@1,0

Da format diese Festplatte nicht anbietet, habe ich es als "other" gewählt. Bei den nachfolgenden Fragen habe ich die Specifikationsseite des Herstellers zu rate gezogen und hab es dann so eingegeben:

Code:

Enter number of data cylinders: 11719
Enter number of alternate cylinders[2]:
Enter number of physical cylinders[11721]:
Enter number of heads: 5
Enter physical number of heads[default]:
Enter number of data sectors/track: 186
Enter number of physical sectors/track[default]:
Enter rpm of drive[3600]: 7200
Enter format time[default]:
Enter cylinder skew[default]:
Enter track skew[default]:
Enter tracks per zone[default]:
Enter alternate tracks[default]:
Enter alternate sectors[default]:
Enter cache control[default]:
Enter prefetch threshold[default]:
Enter minimum prefetch[default]:
Enter maximum prefetch[default]:
Enter disk type name (remember quotes): ST39175LC
selecting c0t1d0
[disk unformatted]

War es richtig so?

Auf jeden Fall beim anschliessendem 'format' sagte er:

Code:

format> inquiry
Vendor: SEAGATE
Product: ST39175LC
Revision: 0001
format> format
Ready to format. Formatting cannot be interrupted.
Continue? y
Beginning format. The current time is Mon Feb 6 00:48:01 2006

Formatting...
Format failed

Retry of formatting operation without any of the standard
mode selects and ignoring disk's Grown Defects list. The
disk may be able to be reformatted this way if an earlier
formatting operation was interrupted by a power failure or
SCSI bus reset. The Grown Defects list will be recreated
by format verification and surface analysis.

Retry format without mode selects and Grown Defects list? y
Formatting...
Not ready error during format
ASC: 0x4 ASCQ: 0x0
failed
format>

Könnt Ihr mir (einem blutigen Solaris newbie) nen Fingerzeig geben, was ich falsch mache? Ich will hoffen, dass die neue Platte funktioniert Shocked

dmesg zeigt mir nämlich viele ähnliche Logs:

Code:

Feb 6 00:27:46 solar scsi: [ID 107833 kern.warning] WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@1,0 (sd1):
Feb 6 00:27:46 solar Error for Command: load/start/stop Error Level: Retryable
Feb 6 00:27:46 solar scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Feb 6 00:27:46 solar scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number:
Feb 6 00:27:46 solar scsi: [ID 107833 kern.notice] Sense Key: Not Ready
Feb 6 00:27:46 solar scsi: [ID 107833 kern.notice] ASC: 0x4 (LUN not ready), ASCQ: 0x0, FRU: 0x2
Feb 6 00:27:49 solar scsi: [ID 107833 kern.warning] WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@1,0 (sd1):
Feb 6 00:27:49 solar offline
[...]
Feb 6 00:50:29 solar scsi: [ID 107833 kern.warning] WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@1,0 (sd1):
Feb 6 00:50:29 solar Error for Command: load/start/stop Error Level: Retryable
Feb 6 00:50:29 solar scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Feb 6 00:50:29 solar scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number:
Feb 6 00:50:29 solar scsi: [ID 107833 kern.notice] Sense Key: Not Ready
Feb 6 00:50:29 solar scsi: [ID 107833 kern.notice] ASC: 0x4 (LUN not ready), ASCQ: 0x0, FRU: 0x2
Feb 6 00:51:20 solar scsi: [ID 107833 kern.warning] WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@1,0 (sd1):
Feb 6 00:51:20 solar Error for Command: format Error Level: Fatal
Feb 6 00:51:20 solar scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Feb 6 00:51:20 solar scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number:
Feb 6 00:51:20 solar scsi: [ID 107833 kern.notice] Sense Key: Not Ready
Feb 6 00:51:20 solar scsi: [ID 107833 kern.notice] ASC: 0x4 (LUN not ready), ASCQ: 0x0, FRU: 0x2

Danke schon mal!
Toby

PS: Nette Community hier