Superuser

Autor Thema: StorEDGE D1000 will nicht unter debian  (Gelesen 3234 mal)

Offline dd

  • Sobl Junior
  • **
  • Beiträge: 91
StorEDGE D1000 will nicht unter debian
« am: 23. Dezember 2005, 15:22:07 »
Hallo,

ich habe nun mein D1000 unter debian angeworfen und sehe - NICHTS ( keine neuen devices ). Dann wurde ein Funktionstest unter Solaris vorgenommen:

1.)     drvconfig
2.)     disks
3.)     devlinks


dann sind die Platten da -> d.h. Controller ist der richtige und
er funktioniert, SCSI-Bus ist korrekt konfiguriert und terminiert.



# format
Searching for disks...done

c0t0d0: configured with capacity of 16.86GB


AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0
       1. c1t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/QLGC,isp@0,10000/sd@0,0
       2. c1t1d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/QLGC,isp@0,10000/sd@1,0
       3. c1t2d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/QLGC,isp@0,10000/sd@2,0
       4. c1t3d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/QLGC,isp@0,10000/sd@3,0
       5. c1t4d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/QLGC,isp@0,10000/sd@4,0
       6. c1t5d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/QLGC,isp@0,10000/sd@5,0
       7. c1t8d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/QLGC,isp@0,10000/sd@8,0
       8. c1t9d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/QLGC,isp@0,10000/sd@9,0
       9. c1t10d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/QLGC,isp@0,10000/sd@a,0
      10. c1t11d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/QLGC,isp@0,10000/sd@b,0
      11. c1t12d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /sbus@1f,0/QLGC,isp@0,10000/sd@c,0
Specify disk (enter its number):  11
selecting c1t12d0
[disk formatted]


FORMAT MENU:
        disk       - select a disk
        type       - select (define) a disk type
        partition  - select (define) a partition table
        current    - describe the current disk
        format     - format and analyze the disk
        repair     - repair a defective sector
        label      - write label to the disk
        analyze    - surface analysis
        defect     - defect list management
        backup     - search for backup labels
        verify     - read and display labels
        save       - save new disk/partition definitions
        inquiry    - show vendor, product and revision
        volname    - set 8-character volume name
        !<cmd>     - execute <cmd>, then return
        quit
format> current
Current Disk = c1t12d0
<SUN18G cyl 7506 alt 2 hd 19 sec 248>
/sbus@1f,0/QLGC,isp@0,10000/sd@c,0

format> verify

Primary label contents:

Volume name = <        >
ascii name  = <SUN18G cyl 7506 alt 2 hd 19 sec 248>
pcyl        = 7508
ncyl        = 7506
acyl        =    2
nhead       =   19
nsect       =  248
Part      Tag    Flag     Cylinders        Size            Blocks
  0 unassigned    wm       0               0         (0/0/0)           0
  1 unassigned    wm       0               0         (0/0/0)           0
  2     backup    wu       0 - 7505       16.86GB    (7506/0/0) 35368272
  3          -    wu       1 -    1        2.30MB    (1/0/0)        4712
  4          -    wu       2 - 7505       16.86GB    (7504/0/0) 35358848
  5 unassigned    wm       0               0         (0/0/0)           0
  6 unassigned    wm       0               0         (0/0/0)           0
  7 unassigned    wm       0               0         (0/0/0)           0


# newfs -v /dev/rdsk/c1t12d0s2
newfs: construct a new file system /dev/rdsk/c1t12d0s2: (y/n)? y
mkfs -F ufs /dev/rdsk/c1t12d0s2 35368272 248 19 8192 1024 229 1 167 8192 t 0 -1 8 128
Warning: cylinder groups must have a multiple of 2 cylinders with the given
         parameters
Rounded cgsize up to 230
/dev/rdsk/c1t12d0s2:    35368272 sectors in 7506 cylinders of 19 tracks, 248 sectors
        17269.7MB in 342 cyl groups (22 c/g, 50.62MB/g, 6208 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
 32, 103952, 207872, 311792, 415712, 519632, 623552, 727472, 831392, 935312,
 1039232, 1143152, 1247072, 1350992, 1454912, 1558832, 1662752, 1766672,
 1870592, 1974512, 2078432, 2182352, 2286272, 2390192, 2494112, 2598032,
hier wurden einige Zeilen gelöscht!
 34835232, 34939152, 35043072, 35146992, 35250912, 35354832,
#
# mount /dev/dsk/c1t12d0s2 /mnt
# ls -la /mnt
total 20
drwxr-xr-x   3 root     root         512 Dec 22 14:18 .
drwxr-xr-x  25 root     root        1024 Dec 22 12:45 ..
drwx------   2 root     root        8192 Dec 22 14:18 lost+found


# mount
die anderen Zeilen wurden gelöscht...
/mnt on /dev/dsk/c1t12d0s2 read/write/setuid/intr/largefiles/xattr/onerror=panic/dev=8000d2 on Thu Dec 22 14:23:38 2005

# cd /mnt
# cp /usr/openwin/bin/* .
# ls
X                htt_props        showfont         xcmsdb           xlsatoms
Xprt             htt_server       showrgb          xcolor           xlsclients
Xsun             iceauth          showsnf          xconsole         xlsfonts
accessx          imake            speckeysd        xcutsel          xlswins
appres           kbd_mode         sxpm             xditview         xmag
atobm            lbxproxy         sys-suspend      xdm              xmakemap
bdftopcf         listres          tt_type_comp     xdmshell         xman
bdftosnf         lost+found       ttauth           xdpr             xmh
bitmap           makebdf          ttce2xdr         xdpyinfo         xmkmf
bmtoa            makedepend       ttcp             xedit            xmodmap
cmap_alloc       makepsres        ttdbck           xfd              xpr
cmap_compact     mkdirhier        ttmv             xfindproxy       xprop
constype         mkfontdir        ttrm             xfontsel         xrdb
ctlconvert_txt   mp_1251          ttrmdir          xfs              xrefresh
ctlmp            oclock           ttsession        xfwp             xrx
cxpm             pclcomp          tttar            xhost            xset
dtpower          proxymngr        tttrace          xinit            xsetroot
editres          pswrap           twm              xkbbell          xstdcmap
fbconsole        redxblue         viewres          xkbprint         xterm
fs               resize           winsysck         xkbvleds         xutops
fsadmin          rgb              xauth            xkbwatch         xwd
fsinfo           rpc.ttdbserver   xbiff            xkill            xwininfo
fslsfonts        rpc.ttdbserverd  xcalc            xload            xwud
fstobdf          rstart           xclipboard       xlock
htt              sessreg          xclock           xlogo
# pwd
/mnt
#
-> die Platte(n) ist erreichbar, formatierbar und funktioniert somit ganz normal unter Solaris.

Weiß hier jemand, wie das entsprechende Prozedere unter debian (linux) ausschaut?

Vielen Dank für Eure Hilfe
Dirk



sonnenblen.de - Das unabhängige Sun User Forum

StorEDGE D1000 will nicht unter debian
« am: 23. Dezember 2005, 15:22:07 »

Offline borgfish

  • Sobl Newbie
  • *
  • Beiträge: 28
Re: StorEDGE D1000 will nicht unter debian
« Antwort #1 am: 23. Dezember 2005, 15:58:18 »
Hallo!

/sbus@1f,0/QLGC,isp@0,10000/sd@c,0

du brauchst das qlogic_isp modul im debian ?
machmal modprobe qlogic_isp

gruss borgfish

Offline dd

  • Sobl Junior
  • **
  • Beiträge: 91
Re: StorEDGE D1000 will nicht unter debian
« Antwort #2 am: 24. Dezember 2005, 15:07:32 »

du brauchst das qlogic_isp modul im debian ?
machmal modprobe qlogic_isp


Fast richtig. Das Modul heißt qlogicpti. Vielen,vielen Dank für das Schubsen in die richtige Richtung!
Jetzt ist die LVM-Session gerettet.

Frohe Weihnachten wünscht
Dirk