Superuser

Autor Thema: Samba Backup Server und WindowsXP mit XCopy nutzen  (Gelesen 7807 mal)

Offline Freud-Schiller

  • Sobl Guru
  • *****
  • Beiträge: 927
Samba Backup Server und WindowsXP mit XCopy nutzen
« am: 29. März 2007, 11:49:55 »
Hi Leute, ich habe einen Samba 3.0 Fileserver (Gentoo 2.4 auf U5) und möchte von Windows XP aus bei jeden Shutdown per XCopy ein Backup auf den Server schreiben.

Dabei verwende ich folgende Parameter: "xcopy /e /d /y .... ..."

Erreichen will ich damit, daß nur die neuen, geänderten Daten kopiert werden. Ledier funktioniert dies nicht und  es werden immer alle Daten kopiert.

Hat jemand eine Idee?

rsync ist (noch) keine Alternative ;)

Gruß und vielen Dank David

sonnenblen.de - Das unabhängige Sun User Forum

Samba Backup Server und WindowsXP mit XCopy nutzen
« am: 29. März 2007, 11:49:55 »

Offline Toktar

  • Sobl Master
  • ****
  • Beiträge: 333
Re: Samba Backup Server und WindowsXP mit XCopy nutzen
« Antwort #1 am: 29. März 2007, 18:53:37 »
Versuch mal Robocopy. Damit kannst Du das prima machen.

http://www.7070.org/docs/backup_script
Toktar
--
Jawoll!
Und DNS braucht's nicht, das ist was fuer Weicheier, die sich keine Zahlen merken koennen.
[Karlheinz Boehme in dcsf]

Offline AndreasW

  • Sobl Master
  • ****
  • Beiträge: 254
Re: Samba Backup Server und WindowsXP mit XCopy nutzen
« Antwort #2 am: 29. März 2007, 21:05:45 »
Hallo David,

aus Deiner Frage geht nicht hervor, welche Randbedingungen vorliegen, so dass rsync nicht in Frage kommt.
Es gibt in der Windows-Welt verschiedene Werkzeuge, die rsync ähnlich sind.
Beispielsweise dirsync und SyncToy. Letzteres gibt es direkt von Microsoft.

Gruß
Andreas

Offline Toktar

  • Sobl Master
  • ****
  • Beiträge: 333
Re: Samba Backup Server und WindowsXP mit XCopy nutzen
« Antwort #3 am: 30. März 2007, 14:58:46 »
Hier mal die Optionen von Robocopy. Wir nutzen das zum nächtlichen Spiegeln, ohne immer alle Dateien nochmal zu kopieren.


-------------------------------------------------------------------------------
   ROBOCOPY     ::     Robust File Copy for Windows     ::     Version XP010
-------------------------------------------------------------------------------

  Started : Fri Mar 30 14:55:07 2007

              Usage :: ROBOCOPY source destination [file [file]...] [options]

             source :: Source Directory (drive:\path or \\server\share\path).
        destination :: Destination Dir  (drive:\path or \\server\share\path).
               file :: File(s) to copy  (names/wildcards: default is "*.*").

::
:: Copy options :
::
                 /S :: copy Subdirectories, but not empty ones.
                 /E :: copy subdirectories, including Empty ones.
             /LEV:n :: only copy the top n LEVels of the source directory tree.

                 /Z :: copy files in restartable mode.
                 /B :: copy files in Backup mode.
                /ZB :: use restartable mode; if access denied use Backup mode.

  /COPY:copyflag[s] :: what to COPY (default is /COPY:DAT).
                       (copyflags : D=Data, A=Attributes, T=Timestamps).
                       (S=Security=NTFS ACLs, O=Owner info, U=aUditing info).

               /SEC :: copy files with SECurity (equivalent to /COPY:DATS).
           /COPYALL :: COPY ALL file info (equivalent to /COPY:DATSOU).
            /NOCOPY :: COPY NO file info (useful with /PURGE).

             /PURGE :: delete dest files/dirs that no longer exist in source.
               /MIR :: MIRror a directory tree (equivalent to /E plus /PURGE).

               /MOV :: MOVe files (delete from source after copying).
              /MOVE :: MOVE files AND dirs (delete from source after copying).

       /A+:[RASHNT] :: add the given Attributes to copied files.
       /A-:[RASHNT] :: remove the given Attributes from copied files.

            /CREATE :: CREATE directory tree and zero-length files only.
               /FAT :: create destination files using 8.3 FAT file names only.
               /FFT :: assume FAT File Times (2-second granularity).
               /256 :: turn off very long path (> 256 characters) support.

             /MON:n :: MONitor source; run again when more than n changes seen.
             /MOT:m :: MOnitor source; run again in m minutes Time, if changed.

      /RH:hhmm-hhmm :: Run Hours - times when new copies may be started.
                /PF :: check run hours on a Per File (not per pass) basis.

             /IPG:n :: Inter-Packet Gap (ms), to free bandwidth on slow lines.

::
:: File Selection Options :
::
                 /A :: copy only files with the Archive attribute set.
                 /M :: copy only files with the Archive attribute and reset it.
    /IA:[RASHCNETO] :: Include only files with any of the given Attributes set.
    /XA:[RASHCNETO] :: eXclude files with any of the given Attributes set.

 /XF file [file]... :: eXclude Files matching given names/paths/wildcards.
 /XD dirs [dirs]... :: eXclude Directories matching given names/paths.

                /XC :: eXclude Changed files.
                /XN :: eXclude Newer files.
                /XO :: eXclude Older files.
                /XX :: eXclude eXtra files and directories.
                /XL :: eXclude Lonely files and directories.
                /IS :: Include Same files.
                /IT :: Include Tweaked files.

             /MAX:n :: MAXimum file size - exclude files bigger than n bytes.
             /MIN:n :: MINimum file size - exclude files smaller than n bytes.

          /MAXAGE:n :: MAXimum file AGE - exclude files older than n days/date.
          /MINAGE:n :: MINimum file AGE - exclude files newer than n days/date.
          /MAXLAD:n :: MAXimum Last Access Date - exclude files unused since n.
          /MINLAD:n :: MINimum Last Access Date - exclude files used since n.
                       (If n < 1900 then n = n days, else n = YYYYMMDD date).

                /XJ :: eXclude Junction points. (normally included by default).

::
:: Retry Options :
::
               /R:n :: number of Retries on failed copies: default 1 million.
               /W:n :: Wait time between retries: default is 30 seconds.

               /REG :: Save /R:n and /W:n in the Registry as default settings.

               /TBD :: wait for sharenames To Be Defined (retry error 67).

::
:: Logging Options :
::
                 /L :: List only - don't copy, timestamp or delete any files.
                 /X :: report all eXtra files, not just those selected.
                 /V :: produce Verbose output, showing skipped files.
                /TS :: include source file Time Stamps in the output.
                /FP :: include Full Pathname of files in the output.

                /NS :: No Size - don't log file sizes.
                /NC :: No Class - don't log file classes.
               /NFL :: No File List - don't log file names.
               /NDL :: No Directory List - don't log directory names.

                /NP :: No Progress - don't display % copied.
               /ETA :: show Estimated Time of Arrival of copied files.

          /LOG:file :: output status to LOG file (overwrite existing log).
         /LOG+:file :: output status to LOG file (append to existing log).

               /TEE :: output to console window, as well as the log file.

               /NJH :: No Job Header.
               /NJS :: No Job Summary.

::
:: Job Options :
::
       /JOB:jobname :: take parameters from the named JOB file.
      /SAVE:jobname :: SAVE parameters to the named job file
              /QUIT :: QUIT after processing command line (to view parameters).
              /NOSD :: NO Source Directory is specified.
              /NODD :: NO Destination Directory is specified.
                /IF :: Include the following Files.
Toktar
--
Jawoll!
Und DNS braucht's nicht, das ist was fuer Weicheier, die sich keine Zahlen merken koennen.
[Karlheinz Boehme in dcsf]

Offline Freud-Schiller

  • Sobl Guru
  • *****
  • Beiträge: 927
Re: Samba Backup Server und WindowsXP mit XCopy nutzen
« Antwort #4 am: 30. März 2007, 19:15:28 »
wie werde die Tipps mal am WE testen und dann mal Ergebnisse posten. Jetzt schon mal danke an Euch :)